Wannabe fitter

[Daz Gizmo]

Yeah all the Premium Compacts have this dimension for the void above.

The "Positioning the microwave oven" text does not read right either... must be some sort of language translation problem to me.... 

[Rapidset]

Yeah all the Premium Compacts have this dimension for the void above.

The "Positioning the microwave oven" text does not read right either... must be some sort of language translation problem to me.... 

Yes I have the 100 clearance as indicated on the drawing.

Cheers

[Stretch]

Good first attempt. Looks tidy and all the doors/fascias seem to be aligned well.

If the Manufacturers Instructions allow sufficient clearance you can run upstands behind a gas hob (you can sometimes get away with 30mm). This is usually achieved by using oversized tops and bring the units forward to suit.

Interesting detail on the worktop edge - don't see that very often. Usually just a round over or slight chamfer.

Agree with the tower end panel. Cut rebate for plinth every time and agree with clearances above upstands for sockets. I've seen upstands cut out to accept sockets which is just wrong on every level.

Well done, I've seen far worse by so called professionals - not on this forum I must add!

Where did you get the kitchen from? Make/supplier I mean....

[Rapidset]

Good first attempt. Looks tidy and all the doors/fascias seem to be aligned well.

If the Manufacturers Instructions allow sufficient clearance you can run upstands behind a gas hob (you can sometimes get away with 30mm). This is usually achieved by using oversized tops and bring the units forward to suit.

Interesting detail on the worktop edge - don't see that very often. Usually just a round over or slight chamfer.

Agree with the tower end panel. Cut rebate for plinth every time and agree with clearances above upstands for sockets. I've seen upstands cut out to accept sockets which is just wrong on every level.

Well done, I've seen far worse by so called professionals - not on this forum I must add!

Where did you get the kitchen from? Make/supplier I mean....

Thanks Stretch I appreciate your kind words ... Never thought about running the upstand behind the hob not sure how that would have looked tiling on the upstand. We have an old property so I wanted a detail on the worktop that would tie in with the period.
 
The kitchen is Crown Lifestyle and the doors are the Gala range.

Cheers

[Colour Republic]

Where did you get the kitchen from? Make/supplier I mean....

I really wish you hadn't asked that 

Got a funny feeling is from that firm that shall not be named. And it would really pain me to say one of theirs looks good. 

Still trying to work out if it's MDF painted or foil wrapped. Money on painted MDF... Which isn't bad btw, in fact the flat finish can sometimes be a requirement.

[Colour Republic]

Ahhh it's Crown. Thank God for that!!!!

[Rapidset]

Where did you get the kitchen from? Make/supplier I mean....

I really wish you hadn't asked that 

Got a funny feeling is from that firm that shall not be named. And it would really pain me to say one of theirs looks good. 

Still trying to work out if it's MDF painted or foil wrapped. Money on painted MDF... Which isn't bad btw, in fact the flat finish can sometimes be a requirement.

Is it who you thought ?  My mate is the Crown Imperial Regional Sales Manager

Yes it's painted MDF wood grain affect

[Colour Republic]

Nah thought it was Howdens .... Notice how that's been blanked out by the forum software, it's like Voldemort around here, out to suck the very life out of you.

[Rapidset]

Nah thought it was H*****s .... Notice how that's been blanked out by the forum software, it's like Voldemort around here, out to suck the very life out of you.

Haha.. I did look at the other make but my mate beat them on price and quality