25-06-2018, 07:25 AM
Has no one out there fitted one of these type of Drawer Fridges before...?
You can see in the picture above, the 2 rebated slots at the top of each drawer. The 4 original brackets are designed to fit in there via fixing bolts and adjusters. The top drawer fixings are ok, coz my 2 drawer fronts are 386mm high so I had to put a filler in between the top of the appliance and the underside of the worktop to ensure the 2 drawer fronts would line up with the gap between the 2 appliance drawers.
The problem is with the lower drawer, with a J Handled door or a drawer handle such as the one I showed a picture of, the screws to fix the brackets to the back of the drawer fronts will come through the handle area coz it's so thin.
By making the brackets longer, the fixing screws will screw into the thicker part of the drawer front.....
You can see in the picture above, the 2 rebated slots at the top of each drawer. The 4 original brackets are designed to fit in there via fixing bolts and adjusters. The top drawer fixings are ok, coz my 2 drawer fronts are 386mm high so I had to put a filler in between the top of the appliance and the underside of the worktop to ensure the 2 drawer fronts would line up with the gap between the 2 appliance drawers.
The problem is with the lower drawer, with a J Handled door or a drawer handle such as the one I showed a picture of, the screws to fix the brackets to the back of the drawer fronts will come through the handle area coz it's so thin.
By making the brackets longer, the fixing screws will screw into the thicker part of the drawer front.....
![[-]](https://www.kitchenfittersforum.com/images/collapse.png)