Integrated dishwasher door / gap problem

[Daz Gizmo]

That's totally brill, thank you so much.

Good point re the LH cupboard. For someone much more able than me, that would be a great option. But I would have to get someone in for it, and I'm fairly sure (without wanting to jinx it) that I can do your other option by myself with a smaller outlay. The sheets look like they'll only be around £25 for the pair, and it will be a lot easier to get a standard white gloss door for a semi-integrated d/w.

Now I just need to convince the other half! Thanks again. Will let you know how I get on...

Oh, and in case it amuses, I today received delivery of a Zanussi tumble dryer (at the rather unsociable hour of 6.40), which at the advertised 540mm depth would fit nicely into my 580mm deep cupboard. Except as it turns out, the dryer is actually 590mm deep. I could understand half a centimetre, but 5cm difference?! That's pretty poor. Thank you very much Zanussi! That will teach me to believe manufacturer's specs, and also to let delivery guys run away before the delivery is unwrapped. Looks like I'll be making a trip to my nearest Currys with my tape measurer before ordering anything else! For anyone that's interested, it was the ZDP7205.

Yeah.... your welcome 

Dimensions = Always a headache for us designers and the installers too.

The depth though, it depends how much detail then go into like including the controls and door etc. It could be they only have given the main box depth.

It looks like a free stander. Should you have gone for a proper integrated one? 

Edit - I think I am right  - ZDP7205 user manual - maximal 610mm: