27-12-2014, 06:31 PM
Sorry Guys...!!!
It was a typing error!!!
Siemens don't do an integrated T/D (as far as I know..) It was an unbranded Int.T/D, and it has a full width air vent in the front plinth-line, about 70mm high!!!!! How anyone can suggest that its officially a Fully Integrated machine has got to be kidding.
As you said Steve, I also had to set the plinth depth slightly further forward on the Sink run to accommodate the T/D. I don't have to do it on the units I get from my German supplier, but on these British units, the legs/bosses are set further back and it does create an issue with some Int. W/M's and T/D's. Still, the difference is only about 10/15mm so its not really noticeable.
Snezza.
It was a typing error!!!
Siemens don't do an integrated T/D (as far as I know..) It was an unbranded Int.T/D, and it has a full width air vent in the front plinth-line, about 70mm high!!!!! How anyone can suggest that its officially a Fully Integrated machine has got to be kidding.
As you said Steve, I also had to set the plinth depth slightly further forward on the Sink run to accommodate the T/D. I don't have to do it on the units I get from my German supplier, but on these British units, the legs/bosses are set further back and it does create an issue with some Int. W/M's and T/D's. Still, the difference is only about 10/15mm so its not really noticeable.
Snezza.
![[-]](https://www.kitchenfittersforum.com/images/collapse.png)