Gloss & Matt Handleless with 20mm Silestone Tops

[andy5405]

I've nearly finished this one. I need to rehang a couple of doors now the floor is finished and install the Hafele lighting with remote control and 3 programmable scenario settings. I love the concrete pendants the customer has chosen above the peninsular island. They produce a copper glow which provides a nice contrast of an evening to the cool white in all the rest of the lighting.

   

   

   

   

   

   

Bespoke Kitchens in Eastbourne, East Sussex

[mister_mitch]

Looks great.

Any idea where the customer got those pendants?

Uform Matte graphite and gloss white I assume?

is the hob a normal 60cm? looks small tucked in the corner there!

[stejoke]

Very nice Andy - looks like a top job mate - not a cheap one either!!!

Like the colours together. 

How do those end panels work - the one to the left of the ovens looks thin from worktop height and thick below, but I can't see a join?

[andy5405]

Looks great.

Any idea where the customer got those pendants?

Uform Matte graphite and gloss white I assume?

is the hob a normal 60cm? looks small tucked in the corner there!

I will find out about the pendants, I'm back there this afternoon.

It is Matt Graphite and White Gloss. It was going to be Graphite Gloss but the finish was so good that the customer decided they were too shiny and the whole kitchen would have been too reflective. I keep banging on about the Uform doors on here but they are really good and worth looking at.

The hob is 60cm and tucked away in a corner but it was the only layout option available. I haven't photographed that angle yet as we're waiting for a replacement extractor to arrive as there was a fault on the original one.

[andy5405]

Very nice Andy - looks like a top job mate - not a cheap one either!!!

Like the colours together. 

How do those end panels work - the one to the left of the ovens looks thin from worktop height and thick below, but I can't see a join?

I added a base end and a wall end panels adjacent to oven tower full height panel to provide clearance for the right hand wall unit bifold doors to open without scraping on the tower end panel. The bifold doors are 355x597 so only have 1.5mm clearance which seemed tight. It might be over cautious and I was going to post design pics on here to ask what people thought but I went ahead and did it anyway.

[stejoke]

Very nice Andy - looks like a top job mate - not a cheap one either!!!

Like the colours together. 

How do those end panels work - the one to the left of the ovens looks thin from worktop height and thick below, but I can't see a join?

I added a base end and a wall end panels adjacent to oven tower full height panel to provide clearance for the right hand wall unit bifold doors to open without scraping on the tower end panel. The bifold doors are 355x597 so only have 1.5mm clearance which seemed tight. It might be over cautious and I was going to post design pics on here to ask what people thought but I went ahead and did it anyway.

Ah I see - thanks!

[andy5405]

The lights were bought here:


http://www.beut.co.uk/lighting/pendant-l...light.html


Manufacturer page here: https://gantlights.de/collections/haengelampen-beton

[KOVKID]

Gorgeous Job  well done 

[Jayne Hiddleston]

Looks lovely! wish i got to design kitchens like this!