Daniel's Latest

[PJK]

Stunning...........just STUNNING.

[Daniel]

love it.

How did you go about mounting those wall units? What sort of hinge mech. do they use?

if you dont mind my asking, what brand of kitchen is this and where is your showroom? 
strike that. Stalked you online and found you. Might PM you for a nosey around your showroom next time im up that way, if you dont mind 

I assume the drawers in front of the chimney are reduced depth? or do the parts either side of the coffee machine not go all the way to the floor?

Thank you mister_mitch 

I didn't mount the wall units myself my fitter did with a lot of cursing (mostly in my direction   ), a large platform and 3 guys !!   Our manufacturer used a mounting bracket like the image below.   Each unit has a 200mm high steel bracing bracket that runs across the rear of the unit which gives the unit all the support it needs to hang off.  Obviously the fixings into the wall need to be equally strong.  These brackets are used for fully floating kitchens and designed to take the weight of integrated ovens, fridges etc ...

Once the wall units are clamped together, and at various points scribed into the plasterboard, we had a belt and braces fixing.

The drawers in front of the chimney breast are 450mm deep.

Yeah sure pop into the showroom whenever you're passing   

   

[Daniel]

Stunning...........just STUNNING.

Thanks PJ 

[Joe the chip]

Well I think this is bloody fabulous! 

I love every aspect of it really, the whole room looks really well thought out and flows beautifully together. 

Masterclass, our furniture manufacturer, are really pushing with us the idea of kitchen furniture integrating into living areas and I think this is the perfect case study of that. Everything looks so well balanced. Really nice job, love it!

Can't see anything wrong at all, except for the qooker hot tap (don't like qookers!) and the tv is on the piss in the last photo 

[mister_mitch]

I didn't mount the wall units myself my fitter did with a lot of cursing (mostly in my direction   ), a large platform and 3 guys !!   Our manufacturer used a mounting bracket like the image below.   Each unit has a 200mm high steel bracing bracket that runs across the rear of the unit which gives the unit all the support it needs to hang off.  Obviously the fixings into the wall need to be equally strong.  These brackets are used for fully floating kitchens and designed to take the weight of integrated ovens, fridges etc ...

Once the wall units are clamped together, and at various points scribed into the plasterboard, we had a belt and braces fixing.

That's great to know. Must be a solid brick wall to mount like that. Are they hinged with something like the Blum Aventos HS with servo drive? 

Appreciate the showroom invite. i'll drop you a pm before passing. 

Cheers.
Mitch

[Daniel]

Well I think this is bloody fabulous! 

I love every aspect of it really, the whole room looks really well thought out and flows beautifully together. 

Masterclass, our furniture manufacturer, are really pushing with us the idea of kitchen furniture integrating into living areas and I think this is the perfect case study of that. Everything looks so well balanced. Really nice job, love it!

Can't see anything wrong at all, except for the qooker hot tap (don't like qookers!) and the tv is on the piss in the last photo 

Thanks Joe.

You don't like Quookers   ..... how come ?

I actually think the TV is way to big for the room and design and should have been mounted about 150mm-200mm lower to balance it better .... heyhoo, I can blame the client for that one!!

[Daniel]

That's great to know. Must be a solid brick wall to mount like that. Are they hinged with something like the Blum Aventos HS with servo drive? 

Appreciate the showroom invite. i'll drop you a pm before passing. 

Cheers.
Mitch

 Yes they are hinged with Aventos HS's but no servo drive- client didn't want to pay the extra.

Going through showroom refurb in December/January so might want to wait until next year if you want to see some of our new stuff. 

[Jayne Hiddleston]

fantastic work Daniel - love it!

[Unitech]

Another level, simply stunning