A recent one of mine

[Festerfly]

A few pictures of a recent one. Just Howden, but felt it turned out well.

Did Electrics, new ceiling, splashbacks etc too.

Hob splashback and filler panel to right of curved cupboard were still to fitted when these pics were taken.

Cheers

[Colour Republic]

Looks like a nice clean fit

What were the splash backs? (nice silicone job BTW)

And is that a plinth used as a filler next to what I assume is the fridge or freezer? Is it because the wall steps out and you needed to get full depth for the appliances?


BUT (you'll learn that a 'BUT' is more of less the law on KFF, were everyone says they would have done something differently no harm meant.) not sure on the corner set-up. Think I would have gone for a 1000 corner with 500 door rather than the 900x900 plus 200 door to the side.

[Alex Morley]

You will also earn rob is a cruel bugger. Lol


Looks really clean other than 1 or 2 doors a little low.

[Festerfly]

Looks like a nice clean fit

What were the splash backs? (nice silicone job BTW)

And is that a plinth used as a filler next to what I assume is the fridge or freezer? Is it because the wall steps out and you needed to get full depth for the appliances?


BUT (you'll learn that a 'BUT' is more of less the law on KFF, were everyone says they would have done something differently no harm meant.) not sure on the corner set-up. Think I would have gone for a 1000 corner with 500 door rather than the 900x900 plus 200 door to the side.

The Splashbacks were from Howdens also, first time i had used them to be honest. was quite pleased with the outcome considering the state of the walls behind!

The towers are all storage aside from the Oven housing. If you look closely in the picture, you will see that there is a small wall (leftover from a brick built pantry) which couldent be removed as it questionably load bearing. Hence why i used a plinth as a spacer and brought it level with the front edge of the cabinet doors to produce a seamless level look!

A 900x900 corner isnt my ideal either, but they had one of those before and were quite keen on them. Also, the 600 cab is an integrated fridge and the curved cupboard to the RH side of this was non-negotiable! lol

Thanks for your reply though.

You will also earn rob is a cruel bugger. Lol


Looks really clean other than 1 or 2 doors a little low.

Low doors? lol

[PREM]

Nice fit there, you have made a howdens look good which is a skill
Unusual the 2 handles on the 900 Lshape usually they catch each other or catch your knuckle.
The plinth filler is a little different but works.

[Festerfly]

Thanks Prem. Kind words.

I prefer the balanced look of the two handles and those strap handles are fortunately quite a low profile so clear each other well.

As the plinth filler is a favourite, ill take the credit!

[Stretch]

Nice job Festerfly...but... can you please resize your pics to 640 x 480 max before uploading please. I've resized them for you in this case but our Forum Photobucket account does it automatically.

PM me for the login details....

[Festerfly]

Apologies Stretch. Ill check on that for the future.