hanging wall units problem

[Guest]

hanging corner wall unit on supplied brackets, the bottom of the unit wants to pull away from the wall

any ideas why

[Guest]

Sorry a bit more detail

When you hang the unit on the brackets and push the unit back it fits to the wall neatly from top to bottom on both sides. As soon as you let go of the unit the bottom pulls out and away from the wall.

[voltarol]

You should level the unit and tighten the hanging bracket
these units have a tendency to push out if the wall is not square and plumb
get it sitting as good as you can then you can lose the gaps when you hang the adjacent units
just make sure your wall plates are secured well and you won't have any trouble[/align]

[Guest]

You should level the unit and tighten the hanging bracket
these units have a tendency to push out if the wall is not square and plumb
get it sitting as good as you can then you can lose the gaps when you hang the adjacent units
just make sure your wall plates are secured well and you won't have any trouble[/align]

Thanks Voltarol - i will try hanging the adjacent units tonight
Martyh