Kitchen Fitters Forum
Gloss & Matt Handleless with 20mm Silestone Tops - Printable Version

+- Kitchen Fitters Forum (https://www.kitchenfittersforum.com)
+-- Forum: The Old KFF (https://www.kitchenfittersforum.com/forumdisplay.php?fid=138)
+--- Forum: Public Forum - Free Posting For Non Registered Guests (https://www.kitchenfittersforum.com/forumdisplay.php?fid=4)
+---- Forum: Members Gallery - Kitchens (https://www.kitchenfittersforum.com/forumdisplay.php?fid=18)
+---- Thread: Gloss & Matt Handleless with 20mm Silestone Tops (/showthread.php?tid=7309)

Pages: 1 2 3 4


Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 06-09-2017

I've nearly finished this one. I need to rehang a couple of doors now the floor is finished and install the Hafele lighting with remote control and 3 programmable scenario settings. I love the concrete pendants the customer has chosen above the peninsular island. They produce a copper glow which provides a nice contrast of an evening to the cool white in all the rest of the lighting.

[attachment=1973]

[attachment=1975]

[attachment=1974]

[attachment=1972]

[attachment=1971]

[attachment=1970]

Bespoke Kitchens in Eastbourne, East Sussex


RE: Gloss & Matt Handleless with 20mm Silestone Tops - mister_mitch - 06-09-2017

ThumbUp

Looks great.

Any idea where the customer got those pendants?

Uform Matte graphite and gloss white I assume?

is the hob a normal 60cm? looks small tucked in the corner there!


RE: Gloss & Matt Handleless with 20mm Silestone Tops - stejoke - 06-09-2017

Very nice Andy - looks like a top job mate - not a cheap one either!!!

Like the colours together. 

How do those end panels work - the one to the left of the ovens looks thin from worktop height and thick below, but I can't see a join?


RE: Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 07-09-2017

(06-09-2017, 11:30 AM)mister_mitch Wrote: ThumbUp

Looks great.

Any idea where the customer got those pendants?

Uform Matte graphite and gloss white I assume?

is the hob a normal 60cm? looks small tucked in the corner there!

I will find out about the pendants, I'm back there this afternoon.

It is Matt Graphite and White Gloss. It was going to be Graphite Gloss but the finish was so good that the customer decided they were too shiny and the whole kitchen would have been too reflective. I keep banging on about the Uform doors on here but they are really good and worth looking at.

The hob is 60cm and tucked away in a corner but it was the only layout option available. I haven't photographed that angle yet as we're waiting for a replacement extractor to arrive as there was a fault on the original one.


RE: Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 07-09-2017

(06-09-2017, 08:03 PM)stejoke Wrote: Very nice Andy - looks like a top job mate - not a cheap one either!!!

Like the colours together. 

How do those end panels work - the one to the left of the ovens looks thin from worktop height and thick below, but I can't see a join?

I added a base end and a wall end panels adjacent to oven tower full height panel to provide clearance for the right hand wall unit bifold doors to open without scraping on the tower end panel. The bifold doors are 355x597 so only have 1.5mm clearance which seemed tight. It might be over cautious and I was going to post design pics on here to ask what people thought but I went ahead and did it anyway.


RE: Gloss & Matt Handleless with 20mm Silestone Tops - stejoke - 07-09-2017

(07-09-2017, 04:37 AM)andy5405 Wrote:
(06-09-2017, 08:03 PM)stejoke Wrote: Very nice Andy - looks like a top job mate - not a cheap one either!!!

Like the colours together. 

How do those end panels work - the one to the left of the ovens looks thin from worktop height and thick below, but I can't see a join?

I added a base end and a wall end panels adjacent to oven tower full height panel to provide clearance for the right hand wall unit bifold doors to open without scraping on the tower end panel. The bifold doors are 355x597 so only have 1.5mm clearance which seemed tight. It might be over cautious and I was going to post design pics on here to ask what people thought but I went ahead and did it anyway.

Ah I see - thanks!


RE: Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 07-09-2017

The lights were bought here:


http://www.beut.co.uk/lighting/pendant-lights/gantlights-t3-pendant-light.html


Manufacturer page here: https://gantlights.de/collections/haengelampen-beton


RE: Gloss & Matt Handleless with 20mm Silestone Tops - KOVKID - 07-09-2017

Gorgeous Job  well done  Cheers


RE: Gloss & Matt Handleless with 20mm Silestone Tops - Jayne Hiddleston - 07-09-2017

Looks lovely! wish i got to design kitchens like this!  ThumbUp