Kitchen Fitters Forum
Gloss & Matt Handleless with 20mm Silestone Tops - Printable Version

+- Kitchen Fitters Forum (https://www.kitchenfittersforum.com)
+-- Forum: The Old KFF (https://www.kitchenfittersforum.com/forumdisplay.php?fid=138)
+--- Forum: Public Forum - Free Posting For Non Registered Guests (https://www.kitchenfittersforum.com/forumdisplay.php?fid=4)
+---- Forum: Members Gallery - Kitchens (https://www.kitchenfittersforum.com/forumdisplay.php?fid=18)
+---- Thread: Gloss & Matt Handleless with 20mm Silestone Tops (/showthread.php?tid=7309)

Pages: 1 2 3 4


RE: Gloss & Matt Handleless with 20mm Silestone Tops - mister_mitch - 07-09-2017

(07-09-2017, 04:30 AM)andy5405 Wrote:
(06-09-2017, 11:30 AM)mister_mitch Wrote: Uform Matte graphite and gloss white I assume?
...
I keep banging on about the Uform doors on here but they are really good and worth looking at.
...

So as a Ufrom advocate, will you be at the 'steps to selling' course they are holding in Reading this month?


RE: Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 07-09-2017

(07-09-2017, 01:13 PM)mister_mitch Wrote:
(07-09-2017, 04:30 AM)andy5405 Wrote:
(06-09-2017, 11:30 AM)mister_mitch Wrote: Uform Matte graphite and gloss white I assume?
...
I keep banging on about the Uform doors on here but they are really good and worth looking at.
...

So as a Ufrom advocate, will you be at the 'steps to selling' course they are holding in Reading this month?

I did think about it briefly but it's not really my thing. That said I don't really know what the course content is so it might be useful. Another problem is I would have to cross several county lines to get there and that would give me a nosebleed. I don't really leave E Sussex and consider having to use a motorway a failure in life.


RE: Gloss & Matt Handleless with 20mm Silestone Tops - Colour Republic - 07-09-2017

Only a quick scan through as on holiday, but been waiting for the pics of this one? Have a proper look through later but very sleek first impressions ?


RE: Gloss & Matt Handleless with 20mm Silestone Tops - PJK - 07-09-2017

Looks amazing Andy. Get the pics watermarked asap. Is the fridge going through the back wall? Love the matt doors. How thick are they and what's the handle like to get your fingers in to open especially on the D/W. 

The only very small but I can see is the end panels look like they were cut to unit height not door height. 

Is the phone in the bowl a sink accessory?  Bling

Is this your new style then mate. If so keep it up it's looking great. Not a scaffold board in sight  Th_ROFLMAO


RE: Gloss & Matt Handleless with 20mm Silestone Tops - PREM - 07-09-2017

That is a scrubber not a phone Jon.

Top job Andy, the up stands look a different shade from the doors?
Would be nice, a view of the hob elevation.

ThumbUp


RE: Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 07-09-2017

(07-09-2017, 07:40 PM)PJK Wrote: Looks amazing Andy. Get the pics watermarked asap. Is the fridge going through the back wall? Love the matt doors. How thick are they and what's the handle like to get your fingers in to open especially on the D/W. 

The only very small but I can see is the end panels look like they were cut to unit height not door height. 

Is the phone in the bowl a sink accessory?  Bling

Is this your new style then mate. If so keep it up it's looking great. Not a scaffold board in sight  Th_ROFLMAO

The end panel height bothered me too. I didn't want to cut them to 715 on the wall cabs as the cabinet would then be proud. I also wanted the bottom of the doors to be flush with the bottom of the cabinet as that is what the eye is drawn to. I could adjust the bi-folds to span the whole 720 so it's flush with the top and bottom of the cabinet but then I'd have and 8-9mm gap between the doors which wouldn't look great and would show the inter-connecting hinges. 

Any advice would be welcome on this one. 

I think this might be my new style. Last year was mainly painted oak and ash and this year seems to be contemporary. The scaffold board shelves kitchen is about half a mile away from this one BTW. I don't travel far for work nowadays. 5 mile max radius from Polegate, beyond that and I get a nosebleed.


RE: Gloss & Matt Handleless with 20mm Silestone Tops - mister_mitch - 08-09-2017

(07-09-2017, 05:27 PM)andy5405 Wrote:
(07-09-2017, 01:13 PM)mister_mitch Wrote:
(07-09-2017, 04:30 AM)andy5405 Wrote:
(06-09-2017, 11:30 AM)mister_mitch Wrote: Uform Matte graphite and gloss white I assume?
...
I keep banging on about the Uform doors on here but they are really good and worth looking at.
...

So as a Ufrom advocate, will you be at the 'steps to selling' course they are holding in Reading this month?

I did think about it briefly but it's not really my thing. That said I don't really know what the course content is so it might be useful. Another problem is I would have to cross several county lines to get there and that would give me a nosebleed. I don't really leave E Sussex and consider having to use a motorway a failure in life.

My name is on the list to attend, but I might not get there, depending on how a new project starts on the Monday. I'm in Rye, so got a similar distance to travel.

I did the course the first time they ran it 4 years ago. Eamon is a good, passionate, public speaker, goes through industry stats, what selling etc. the about future Uform product. Then some stuff on how best to present kitchens, advice on pre-qualifying customers, different selling techniques and closes. then a bit of what ever people in the room want to cover.
I found it good the first time, if I get there this time it will be as much for the networking and then the up to date stats & products etc.


RE: Gloss & Matt Handleless with 20mm Silestone Tops - andy5405 - 08-09-2017

I didn't know you were in sunny Sussex by the sea. It seems it may well be KFF's most represented county. It all happens down here!


RE: Gloss & Matt Handleless with 20mm Silestone Tops - Stretch - 08-09-2017

Looks a million dollars mate.

If I was going to be really picky I would say that there's a bit of finishing needed around the ceiling roses on the pendants but that's just cosmetic  

It's nice to get some clean uncluttered pics of a job without all the customers crap on there.

Good job mate!  ThumbUp